7 Copperfield Road, Coventry, West Midlands, England, United Kingdom
0044 2084 323 088

D556 water-based Su Huishi primer / SR666 water-based interface additive

2024 年 3 月 20 日

admin

D556 water-based Su Huishi primer

Product characteristics：

Tuyouku Water-based Su Huishi, is a multi-purpose quick-drying single-component primer with excellent filling.Filling, good adhesion between layers, good polishing, and the opposite paint will not absorb luster.

Applicable base material

epoxy primer surface midway primer surface

Mixing ratio

D556 primer

100%

Deionized water

20 – 30%

Available time after mixing

25℃：4h

Number of construction times

1.5-2Coating，25-40um

Interlayer interval

the interval between layers is 10-15 minutes. After spraying, it must be left for 15-20 minutes before heating and baking, or self-drying.

Repeated construction

Small particles and hanging places can be polished with wax after 2000# sandpaper after complete hardening.

Spraying tools and air pressure

Geocentric spray gun (upper pot)

1.4-1.8mm

3-5kg/c㎡

Suction spray gun (lower pot)

1.7-2.0mm

3-5kg/c㎡

Dry and solid time

Temperature

Mixed ratio/25℃

non-stick dust time

10 min

ouchable time

15 min

assembly time

1 h

Storage period

put it in a cool and dry place / 20℃, and the original cover can be stored for two years.

Packaging specifications

1L or 4L cans

Notes:

1. When the temperature is below 10℃, it is recommended to bake in the oven of 40-50℃ for 30 minutes to facilitate the solidification of the paint film.
2. Use 600#-800# wet grinding, 400#-600# dry grinding.
3. When the temperature is at 5℃, it is recommended not to add water, but to add ethanol as water in proportion.

SR666 water-based interface additive

Product features：

Dissolve the interface position of old and new paint,Dissolve the new and old paint films into one.

Scope of application

New and old paint film interface after varnish repair

Mixing ratio

It can be used without mixing with any diluent. If you need to mix it, add it in a 1:1 ratio with the remaining varnish in the spray gun

Spraying method

After finishing the repainting, immediately spray it gently at the interface position, and the spraying pressure should be 2kg/m2.

Storage period

put it in a cool and dry place / 20℃, and the original cover can be stored for two years.

Packaging specifications

1L

example, category, and, terms

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注